Silicone Sponge Rubber is designed for high performance gasketing, thermal shielding, vibration mounts and press pads. It is available in six constructions. (see below)
R10470 – is a general-purpose silicone sponge, can be used in most applications.
R10480 – has extremely low compression set and maintains its resiliency even under extended compression.
R10460 – silicone sponge rubber is flame retardant. When held in a vertical position and exposed to a 2,000°F flame for 12 seconds, there is no residential flame and less than a 10 second afterglow. Like R10480, it is especially resistant to compression set.
R10450 – with fiberglass reinforcement is a unique construction. It has the compressibility of sponge, plus dimensional stability in the X-Y direction. The absence of stretch contributes to the consistent size and shape of die cut parts and eliminates outward extrusion under pressure.
R10490 – can be used as a gasket where it is necessary to contain fluids that would degrade normal silicone sponge and solid materials (special order basis).
R10404 – is designed for use where both conformability and heat transfer are necessary, such as between printed circuit boards and heat sinks, decal transfer or applying heat activated adhesives.
You may also need:
- PTFE Zone Tape
PTFE zone tape is primarily used in applications where it is not desirable for adhesive to come in contact with a heating element.
- Metal Detectable PTFE Tape
Metal detectable PTFE tape is ideal for food manufacturers who are packaging their products in poly bags. Tape that contaminates packaged food is detected
- UHMW Ultra High Molecular Weight Film
UHMW Ultra High Molecular Weight Film is one of the toughest polyethylene classifications available. UHMW film has a molecular weight in the millions
- PTFE Tape for Packaging Machinery
PTFE tape for packaging machinery is manufactured by coating fiberglass cloth with PTFE, The material is then etched on one side which allows it to accept an adhesive system.
- PTFE Fabric
Our PTFE fabric consists of a fiberglass substrate which is then coated with PTFE. This combination provides a dimensionally strong non-stick surface