M-Boss PTFE Fabric

M-boss PTFE Fabric - Andrew Roberts

Previously when a package was required to have a visible seal a porous PTFE fabric had to be used, the problem with this method was low in PTFE content which meant fewer seals before failure and the openings of the porous fabric eventually filled up with melted film.

M-Boss PTFE fabric is non-porous. A proprietary coating process allows for a generous amount of PTFE to be applied to the fabric while still allowing the natural texture of the fiberglass to come through, resulting in a long lasting product that embosses a readily visible pattern into the film.

Continuous operating temperature (Fahrenheit)

-415 to +500

You may also need:

  • Metal Detectable PTFE Tape

    Metal detectable PTFE tape is ideal for food manufacturers who are packaging their products in poly bags. Tape that contaminates packaged food is detected

     

  • High Modulus PTFE Tape

    High modulus PTFE tape has less elongation and greater tensile strength than plain skived PTFE tape.

     

  • UHMW – Ultra High Molecular Weight Tape

    Ultra High Molecular Weight Tape is a linear polymer with a pressure sensitive acrylic adhesive on one side.

     

  • PTFE Tape for Packaging Machinery

    PTFE tape for packaging machinery is manufactured by coating fiberglass cloth with PTFE, The material is then etched on one side which allows it to accept an adhesive system.

     

  • PTFE Fabric

    Our PTFE fabric consists of a fiberglass substrate which is then coated with PTFE. This combination provides a dimensionally strong non-stick surface

     

Copyright © 2017 Andrew Roberts, Inc. All Rights Reserved.Worldwide