General Purpose Silicone Gaskets

F510 general purpose silicone gaskets are the ideal gasketing material designed for a broad range of industrial chemical applications. F510 gasketing material not only maintains performance and integrity at higher pressures and temperatures, it decreases creep relaxation and cold flow unlike traditional PTFE (ptfe) gaskets. 

 

General Purpose Silicone Gaskets - Andrew Roberts

F510 is designed to withstand normal concentrations of acids, bases, and solvents as well as to be used with water, steam and fuels. It is highly abrasion resistant, unaffected by aging, and is available in large sheet sizes up to 60″ x 120″.

 
Property

ASTM Method

F510 General Purpose

F710 Chemical Resistant

F910 FDA-Compliant

Color

Fawn

Blue

White

Temperature

-350ºF to +500ºF

(-212ºC to +260ºC)

-350ºF to +500ºF

(-212ºC to +260ºC)

-350ºF to +500ºF

(-212ºC to +260ºC)

Pressure Limit, psi bar

1,233 (85)

1,160 (80)

1,160 (80)

Sealability: Leakage rate (ml/hr), .07 bar@ 2000psi (14 n/mm?) using ASTM Fuel A

F-37A

0.18

.013

0.09

Compressibility, (%) 2500 psi

F-36

10%

10%

6%

Recovery, (%) 2500 psi        
Creep Relaxation, (%) stress loss after 22 hrs. @ 100ºC @ 6000 psi initial compression force

F-38B

20%

12%

23%

Tensile, psi (N/mm?)

D-882

3,950 (27)

3,300 (21)

3,600 (25)

Elongation

D-882

300%

300%

300%

 

 

Standard Sizes for F510, F710 & F910

English

Metric

48″ x 48″ 1220 mm x 1220 mm
60″ x 60″ 1520 mm x 1520 mm
60″ x 90″ 1520 mm x 2290 mm
60″ x 120″ 1520 mm x 3050 mm
1/32″, 1/16″, 1/8″, 1/4″ 0.8mm, 1.6 mm, 3.2 mm, 6.4 mm

You may also need:

  • PTFE Tape for Packaging Machinery

    PTFE tape for packaging machinery is manufactured by coating fiberglass cloth with PTFE, The material is then etched on one side which allows it to accept an adhesive system.

     

  • Silicone Sponge Rubber

    Silicone Sponge Rubber is designed for high performance gasketing, thermal shielding, vibration mounts and press pads. It is available in six constructions

     

  • UHMW Ultra High Molecular Weight Film

    UHMW Ultra High Molecular Weight Film is one of the toughest polyethylene classifications available. UHMW film has a molecular weight in the millions

     

  • PTFE Fabric

    Our PTFE fabric consists of a fiberglass substrate which is then coated with PTFE. This combination provides a dimensionally strong non-stick surface

     

  • UHMW Tape – Ultra High Molecular Weight Tape

    Ultra High Molecular Weight Tape is a linear polymer with a pressure sensitive acrylic adhesive on one side.

     

Copyright © 2017 Andrew Roberts, Inc. All Rights Reserved.Worldwide