Teflon Tape - Standard Grade

Teflon Tape - Standard Grade

Acrylic Adhesive - This series of Teflon tape is manufactured by coating one side of our #402 standard grade fabrics with a high tack, pressure sensitive acrylic adhesive. These products are the best choice when applied to an ambient surface, and heat is applied to the fabric. Most sizes are available with or without blue poly release liner.

Silicone Adhesive - This series of Teflon tape is manufactured by coating one side of our #402 standard grade fabrics with a pressure sensitive silicone adhesive. These products are designed for applications requiring operating temperatures up to 500°F.Typical packaging and general industrial applications include covering heat sealing jaws and elements on various types of equipment such as shrink wrap/L bar, blister packaging, and form/fill/seal. . Aerospace applications include tool and mold release, heater cable and wire harness wrap as well as flash breaker tape. Available with or without yellow release liner.

Which Adhesive System Should You Use?

Acrylic Adhesive Teflon tapes usually have a blue liner. The adhesive itself is aggressive and has an extended shelf life over a narrower range of temperatures (-100 F to 350 F). In some cases these tapes can handle the the intermittent temperatures required for impulse sealing.

Silicone Adhesive Teflon tapes are supplied with a yellow release liner. This would be the best choice when applying to a heated surface, and has an operating temperature range of -100 F to 500 F. Normal shelf life is between 12 & 18 months.

Typical Physical Properties Series 254 Standard Grade Teflon Tape - Acrylic Adhesive
Product Number	Backing Thickness (ins)	Total Thickness with adhesive (ins.)	Break Strength lb/in width (warp/fill)	Adhesion oz./in width	Dielectric Strength Total Volts	Insulation Class
254-3A	.003	.005	70/50	50	2500	155
254-5A	.005	.007	120/100	50	3500	155
254-6A	.006	.008	135/140	50	4500	155
254-10A	.010	.012	225/175	50	5500	155
254-14A	.014	.016	400/200	50	4500	155

Typical Physical Properties Series 254 Standard Grade Teflon Tape - Silicone Adhesive
Product Number	Backing Thickness (ins)	Total Thickness with adhesive (ins)	Break Strength lb./in width (warp/fill)	Adhesion oz./in width	Dielectric Strength total volts	Insulation Class
254-3S	.003	.005	70/50	40	2500	220
254-5S	.005	.007	120/100	40	3500	220
254-6S	.006	.008	120/100	40	4500	220
254-10S	.010	.012	225/175	40	5500	220
254-14S	.014	.016	400/250	40	4500	220

Available 40" wide x the yard or in slit rolls from 1/4" to 36" in lengths of 10*,18 & 36 yards.

Minimum quantities may be required for 10yd rolls of certain thickness'.

Values shown are nominal and should not be used for writing specifications

Datasheet Directory