Teflon Coated Glass Tape - 254-S Series

Teflon® Coated Glass Tape - 254-S Series

This series of PTFE tape is manufactured by coating one side of our #402 standard grade fabrics with a pressure sensitive silicone adhesive. These products are designed for applications requiring operating temperatures up to 500°F.Typical packaging and general industrial applications include covering heat sealing jaws and elements on various types of equipment such as shrink wrap/L bar, blister packaging, and form/fill/seal. Some general applications are: chute, bed and bin liners. Electrical applications include commutator insulation, slot liners, spacers, field and armature winding, cable and conductor wrapping and splicing. Aerospace applications include tool and mold release, heater cable and wire harness wrap as well as flash breaker tape. Available with or without yellow release liner.

Typical Physical Properties Series 254-S* Standard Grade tape
Product Number	Backing Thickness (ins)	Total Thickness with adhesive (ins)	Break Strength lb./in width (warp/fill)	Adhesion oz./in width	Dielectric Strength total volts	Insulation Class
254-3S	.003	.005	70/50	40	2500	220
254-5S	.005	.007	120/100	40	3500	220
254-6S	.006	.008	120/100	40	4500	220
254-10S	.010	.012	225/175	40	5500	220
254-14S	.014	.016	400/250	40	4500	220

Continuous Operating Temperature -40 to +500° F

"S" denotes high temperature silicone adhesive

Available 40" wide x the yard or in slit rolls from 1/4" to 36" in lengths of 10*,18 & 36 yards.

Minimum quantities may be required for 10yd rolls of certain thickness'.

Values shown are nominal and should not be used for writing specifications

Datasheet Directory