Teflon Coated Glass Tape - 254-A Series

Teflon Coated Glass Tape - 254-A Series

This series of PTFE tape is manufactured by coating one side of our #402 standard grade fabrics with a high tack, pressure sensitive acrylic adhesive. These products are the best choice when applied to an ambient surface, and heat is applied to the fabric. Most sizes are available with or without blue poly release liner.

Typical Physical Properties Series 254-A* Standard Grade Tape
Product Number	Backing Thickness (ins)	Total Thickness with adhesive (ins.)	Break Strength lb/in width (warp/fill)	Adhesion oz./in width	Dielectric Strength Total Volts	Insulation Class
254-3A	.003	.005	70/50	50	2500	155
254-5A	.005	.007	120/100	50	3500	155
254-6A	.006	.008	135/140	50	4500	155
254-10A	.010	.012	225/175	50	5500	155
254-14A	.014	.016	400/200	50	4500	155

Continuous Operating Temperature -40 to +350� F

"A" denotes high temperature acrylic adhesive

Available 40" wide x the yard or in slit rolls from 1/4" to 36" in lengths of 10*,18 & 36 yards.

Minimum quantities may be required for 10yd rolls of certain thickness'.

Values shown are nominal and should not be used for writing specifications

Datasheet Directory