|
This series of
PTFE tape is manufactured by coating one side of our #402 standard
grade fabrics with a pressure sensitive silicone adhesive. These
products are designed for applications requiring operating
temperatures up to 500øF.Typical packaging and general
industrial applications include covering heat sealing jaws and
elements on various types of equipment such as shrink wrap/L
bar, blister packaging, and form/fill/seal. Some general
applications are: chute, bed and bin liners. Electrical
applications include commutator insulation, slot liners,
spacers, field and armature winding, cable and conductor
wrapping and splicing. Aerospace applications include tool and
mold release, heater cable and wire harness wrap as well as
flash breaker tape.
ALL THESE TAPES CAN BE USED IN DIRECT
CONTACT WITH FOOD.
|
Typical Physical Properties
Series 254-S* Standard Grade tape |
|
Product Number |
Backing Thickness
(ins) |
Total
Thickness with adhesive (ins) |
Break
Strength
lb./in width
(warp/fill) |
Adhesion
oz./in width |
Dielectric Strength
total volts |
Insulation Class |
|
254-3S |
.003 |
.005 |
70/50 |
40 |
2500 |
220 |
|
254-5S |
.005 |
.007 |
120/100 |
40 |
3500 |
220 |
|
254-6S |
.006 |
.008 |
120/100 |
40 |
4500 |
220 |
|
254-10S |
.010 |
.012 |
225/175 |
40 |
5500 |
220 |
|
254-14S |
.014 |
.016 |
400/250 |
40 |
4500 |
220 |
Continuous operating
temperature (Fahrenheit) -100 to +500
"S" denotes
Silicone adhesive
All the tapes
listed above are available 40" wide x the yard or in custom slit
widths from 1/4" to 36" in roll lengths of 18 & 36 yards.
Values
shown are nominal and should not be used for writing
specifications. |
