|
This series of PTFE tape is manufactured by
coating one side of our #402 standard grade
fabrics with a high tack, pressure sensitive
acrylic adhesive. These products are the
best choice when applied to an ambient
surface, and heat is applied to the fabric.
All of these tapes can be used in direct contact with food.
|
Typical Physical
Properties
Series 254-A* Standard Grade Tape |
|
Product
Number |
Backing
Thickness (ins) |
Total Thickness with adhesive (ins.) |
Break Strength
lb/in width
(warp/fill) |
Adhesion
oz./in width |
Dielectric
Strength
Total Volts |
Insulation
Class |
|
254-3A |
.003 |
.005 |
70/50 |
50 |
2500 |
155 |
|
254-5A |
.005 |
.007 |
120/100 |
50 |
3500 |
155 |
|
254-6A |
.006 |
.008 |
135/140 |
50 |
4500 |
155 |
|
254-10A |
.010 |
.012 |
225/175 |
50 |
5500 |
155 |
|
254-14A |
.014 |
.016 |
400/200 |
50 |
4500 |
155 |
Continuous Operating Temperature -40 to +350 Farenheit
"A" denotes high
temperature acrylic adhesive
All the above tapes are available 40" wide x the yard or in
slit rolls from 1/4" to 36" in lengths of 10*,18 & 36 yards.
Minimum quantities may be required for 10yd rolls of certain
thickness'.
* Use
silicone adhesive for high temperature applications (up to
550° F)
Values shown
are nominal and should not be used for writing
specifications
|
Contact Us |
| |
Monday - Thursday |
|
Toll Free:
800 637 6694 |
| |
8:30 to 5:00 - EST |
|
Telephone: 508 653 6412 |
| |
Friday -
8:30 to 4:30 |
|
FAX: 508 651 3055 |
|
E-mail:
info@andrewroberts.com |
|
