Strip-n-Stick Silicone Rubber Tapes

 

For extreme temperature applications, Strip N Stick silicone rubber tapes out-perform all other elastomers in service life, weatherability, compression set resistance, and electrical resistivity.

These pressure sensitive Strip N Stick tapes are available in a variety of widths and thicknesses for use in gasketing, cushioning, thermal insulation, and vibration dampening applications. Other uses include noise reduction, clamping of hot parts, and electrolysis reduction between dissimilar metals.

Strip N Stick is available in standard stock widths or slit to order. This includes:

100S  is a silicone sponge with a high temperature silicone adhesive

200A  is a silicone sponge with an aggressive acrylic adhesive

300AR  is a reinforced silicone sponge with an aggressive acrylic adhesive. Its unique construction provides the compressibility of sponge and the dimensional stability of fiberglass reinforcement. Stretch is eliminated, which contributes to the consistent size and shape of cut parts and inhibits outward extrusion under high pressure. It further permits close tolerance slitting.

440S  combines a 30 durometer solid rubber with a high temperature silicone adhesive.

440A  combines a 30 durometer solid rubber with an acrylic adhesive. It provides for high elongation and good conformability, and is an excellent gasketing material.

512AF  uses CHR® F12 fire blocking foam along with a film -supported acrylic pressure sensitive adhesive.

(see chart below)

Properties

  100S 200A 300AR 440S 440A 512AF  
Color orange-tan orange-tan blue-gray lt-gray lt-gray gray  
Base Material R10470M R10470M R10450     F-12  

Silicone Rubber Material Type

sponge sponge fiberglass reinforced sponge solid solid foam  
Adhesive Type (all with release liner) silicone acrylic acrylic silicone acrylic acrylic  
Density of Backing (lb./in.) .019 .019 .020 .040 .040 .007  
Adhesion to Steel 15 30 30 15 30 30  
Compression Deflection (PSI) (compressed to 75% of orig. thickness) 10 10 15 45 45 3  
Tensile Strength (PSI) 90 65 100 fabric break (PPI) 700 700 20 film break (PPI)  
Elongation (%) 150 150 <10 650 650 75  
Compression Set (%) (compressed 50% for 22 hrs. at 212ºF) 25 25 25 30 30 5  
Thickness Tolerance (inches)             Roll Length (yards)
1/32 /+ - .010 - - - K K - 20
1/16 /+ - 1/64 K K K - - K 10
3/32 /+ - 1/64 K K * - - * 10
1/8 /+ - 1/32 K K K - - K 10
3/16 /+ - 1/32 K K K - - K 5
1/4 /+ - 3/64 to 1/32 - - - - - K 5
Width (Inches) 1/2 to 35 1/2 to 35 1/4 to 35 1/2 to 20 1/2 to 20 1/2 to 35  

 

 

PRODUCT DATASHEET

 

Andrew Roberts Inc. 

800.637.6694


 

 

 

Home     |     About Us     |     Services     |     Quotes     |     Blog     |     Contact Us

andrewroberts.com © 2006