Skived PTFE Film - Andrew Roberts Inc

PTFE sheet and film are manufactured from virgin PTFE resins which are molded, sintered, and skived to the appropriate thickness. Both sheet and film are widely used in a number of industries due to the material's outstanding characteristics, including heat and chemical resistance, dielectric strength and anti-stick properties. Sheet and film may also be chemically etched on one or both sides for bondability.

T-100 is a skived, virgin grade PTFE sheet. It is available in thicknesses ranging from 0.0115" to 0.25" and in widths of 12", 24", 36", and 48". PTFE film is supplied either in sheet or continuous roll form. Slit widths are available in thicknesses ranging from 0.001" to 0.062" and to the exacting tolerances of the wire and cable, and electronic industries. Custom colors are also available, please call 800.637.6694 for more information.

T-100 Virgin Skived Film
Thickness (inches)	.001	.002	.003	.005	.006	.010
Tolerance +/- inches	.0001	.0003	.0003	.0003	.0003	.0005
Tensile Strength - Minimum PSI	3000	3000	3000	3500	3500	4000
Elongation - % Minimum	200	200	200	300	300	300
Dielectric Strength - VPM	3000	2500	2500	2000	2000	1700
Other thichnesses available upon request. T-100 film meets the requirements of MIL-P-22241B, Type 2, Grade A and other appropriate AMS and ASTM specifications
T-100 Virgin Skived Sheets
Thickness (inches)	.015	.031	.062	.125	.188	.250
Tolerance +/- inches	.001	.0015	.005	.007	.009	.010
Tensile Strength - Minimum PSI	4000	4000	4000	3500	3500	3500
Elongation - % Minimum	300	300	300	300	300	300
Dielectric Strength - VPM	1500	1200	700	-	-	-
Weight - lbs/ft²	.18	.38	.76	1.53	2.30	3.00
Other thicknesses available upon request. T-100 film meets the requirements of MIL-P-22241B, Type 2, Grade B and other appropriate AMS and ASTM specifications