Heat Sealers - Belt Repair Tools

Heat Sealers & Belt Repair Tools

Now available through Andrew Roberts is a complete sealing package including heat sealers, high temperature bonding film, silicone release cloth, silicone rubber covered hand rollers, mineral board, seam prep kits and spare parts.

Heat Sealers

	Model HT-1 (sealing surface 3" x 6-1/2") Fixed handle positions. Our most economical model. Same power and controls as the HT-2 and HT-3.

	Model HT-2 (sealing surface 3" x 6-1/2") Three handle positions. Our most popular model. Handle is removable for shipping and storage

	Model HT-3 (sealing surface 3" x 6-1/2") Similar to the HT-2 except for a 2 inch thick base. Designed for use in extremely cold work areas.

Model HT-9 Heat Sealer

Wattage - 600	Sealing Area-Model 9A 1.25" x 9"
Amperage 5 @ 120 Volts	Sealing Area-Model 9B 1" x 9"
Weight - 5 lbs.	Sealing Area-Model 9C 1.5" x 9"

There are three sealers in the HT-9 series. The only difference is the width of the base. Designed for sealing small Polytetrafluoroethylene (Teflon) coated conveyor belts such as fuse press machines, small laminators and tortilla cooking presses. The 1.25 inch wide sealing area of the Model HT-9A is best suited for making simple 1 inch wide overlap splices. The narrow heated surface minimizes distortion of the belt outside of (and immediately adjacent to) the overlap sealed area.

Model 23-110A Heat Sealer

Wattage - 1000	Sealing Area - 3" x 7.5"
Amperage - 7 @ 120 Volts 3.5 @ 240 Volts	Weight - 18.6 lbs. (including the 6 Lb.removable lead weight).

This sealer includes a digital temperature controller that displays the actual temperature of the platen, and a removable 6 lb lead weight. Recommended for sealing Polytetrafluoroethylene (Teflon) coated conveyor belts under 60 inches wide.

Model 45-110A Heat Sealer

Wattage - 1800	Sealing Area - 3" x 14.5"
Amperage - 15 @ 120 Volts 7 @ 240 Volts	Weight - 36.5 lbs. (including the 11 Lb.removable lead weight).

This sealer includes a digital temperature controller that displays the actual temperature of the platen and a removable 11 lb lead weight. Recommended for sealing Teflon coated conveyor belts over 60 inches wide.

Model 96 Heat Sealer


Wattage - 3150	Sealing Area - 4" x 24"
Amperage - 14.3 @ 220 Volts	Weight - 36 lbs.

This sealer includes a digital temperature controller that displays the actual temperature of the platen and is shipped with two additional 26 lb. weights with handles. The weights are designed to be placed on top of the heat sealer when extra downward force is required. Heater elements are grouped closer together near the ends of the sealer to ensure even heat for the full length of the sealer.

Tacking Irons

Tacking irons are available in brass or aluminum. Stock head sizes include 1" x 3" rectangular, 2" x 3" rectangular and 3" round. These tools are designed with a wattage that will achieve the proper sealing temperature for Teflon without the need for a temperature controller.

Tacking Iron Model

Head Material and Size

MODEL # HI-200-1

Aluminum, 2 " X 3" rectangular

MODEL # HI-200-2

Aluminum , 1 " X 3" rectangular

MODEL # HI-200-3

Aluminum, 3" round

MODEL # HI-300-1

Brass , 2 " X 3" rectangular

MODEL # HI-300-2

Brass, 1" X " 3"rectangular

A range of wattage options is available for each tacker model.

Belt Repair Kits

This kit contains everything needed to repair Polytetrafluoroethylene (Teflon) coated conveyor belts and Teflon coated fabric products. Included is a lightweight sealing iron with a 3 inch diameter sealing head, a high temperature mineral board work surface, a variety of patching materials and an instruction manual. This product is only recommended for applying small patches to Teflon coated materials. This tool is not recommended for the heat sealing of full width seams.

Datasheet Directory